If you have wet walls, which you will surely get mold. Plasterboard, plaster, plywood, paper and cardboard give mold a perfect place to grow. The materials for the construction of the walls are porous, so that gives mold a good place to live.
Chartarum Stachybotrys, a sort of infamous toxic black mold, which is a bit 'green-black, often in wet walls. Unlike your shower spray, non-toxic, this mold often grows under construction.
If youhave wet walls in your home, remove the material immediately and make sure the black mold does not return.
Getting Rid of Moldy Walls
A big mistake people often tried to paint over stains of water damage on their walls. Will not do anything! In your face, mold can grow very well in the paint.
What should you do is wet the portion of the wall. Remove all wet walls as soon as possible, before throwing a chance to grow from. BeforePulls out, spray with water from a spray bottle. All material porous wall must be wet when you remove it so you will be the spread of mold spores, not everywhere.
Wear protective clothing, make sure that the area has a lot of traffic and get rid of moldy wall material safely. Have all moldy things in plastic bags for safe disposal. It is important to let the rest of the house to trace the source of mold.
Now look at the dry part, to see if there's moldhiding behind it. You can climb just a small piece of moldy wall of the area and monitor. In areas where the walls are wet, there's a good chance that the wall adjacent to dry the growth of mold.
After removing the damp walls, spray the walls with a bleach solution. Be careful with bleach. Mix with other cleaners can cause toxic fumes. You should only use water in your bleach solution. Makes it vulnerable, not more than 1 part bleach and 1Part of the water. Bleach can irritate your nose, eyes and ears.
Use a brush to scrub the wall and be sure to get rid of all molds. If some of the slopes of mud to the floor, wipe it with a vacuum cleaner.
If possible, get rid of everything that has already been in contact with gypsum. This includes Clothes Drop, but the clothes they wore. If you do not want to get rid of your clothes, wash thoroughly in hot water and bleach.
Keep Out Of Your formMure
Before you do anything new, make sure that the wall has dried completely. You can use a dehumidifier in your basement, or where the walls are wet, to speed up the process. Just make sure it is completely dry before you start to build again.
When the new building, there are few materials that will help keep mold away, depending on what you are going to sit there. Aboard Backer concrete should assist the drywall. If you want to use tiles, put a 1 / 2Backer inch concrete board. If you want to put a surround given green rocks plate. Can be found on board Backer concrete and rocks on board a green home or offer local hardware store.
The most important thing you can do to keep mold from ever again is to keep the room dry and well ventilated. Remember to keep its shape from the wet, dark places, and grows well on porous material. Once you have cleaned with new walls, so make sure from time to time, sitting in order to ensure that the form is not returned.