If you have wet walls, you will definitely love you. Plasterboard, plaster, plywood, paper and cardboard are an ideal place to grow. The materials for the construction of the walls are porous, then gives the form of a place to live.
Stachybotrys chartarum, a type known toxic black mold, which is a slightly greenish-black color, is often found in wet walls. Unlike your kind, non-toxic spills, this growth, often insane building materials.
If youhave wet walls in the house, you must immediately remove the material and to ensure that black is back.
Disposing of moldy walls
A big mistake people often make is to try to paint over water stains on their walls damage. Will do nothing! In front, you really love grows well in paint.
What you should do is beyond the law sections of the wall. Remove all wet wall as quickly as possible, before the form has a chance to grow. Firstyou pull out, spray with water from a spray bottle. All porous materials should be wet when the wall is removed so that will not be distributed anywhere form spores.
Wear protective clothing, make sure the area is busy and get rid of moldy wall materials safely. Put all the moldy stuff in plastic bags for safe disposal. It 'important to form spores contaminate the rest of the house.
If you are in arid areas to see if there is crazyhiding behind it. You can only take a small piece of wall in the area of moldy and control. In areas where the walls are wet, there's a good chance that the wall adjacent to a dry mold will grow.
After removing the walls wet, spray the walls with a bleach solution. Be careful with bleach. Mix with other cleaners can cause toxic fumes. We recommend using only water in the bleach solution. Make it weaker, not more than 1 bleach to 1 partpart water. Bleach can irritate the nose, eyes and ears.
Use a wall spot and be sure to get rid of all molds. If some of the mud came down to earth, clean with a vacuum cleaner.
If possible, delete everything that is in contact with the mold was. This includes Clothes Drop, but also the clothes you wear. If you do not want to get rid of the clothes, it was good in hot water and bleach.
Teams from the moduleWall
Before you have new things to install, make sure that the wall dry completely. You can use a dehumidifier in your basement or go where the walls are wet to accelerate. Just make sure it is completely dry before starting to build again.
While generating new, there are some materials that will help define the street, depending on what you plan for it. A table Backer concrete can be used to maintain the Drywall. If you want to use the stone has halfinch concrete board supporter. If you have a surround set to receive a green sheet rock. You Backer cement board and green board stone found at the home of local supply or hardware store.
The most important thing you can do to prevent mold growing in dry, well ventilated room. Remember that the form of wet, dark places, and grows well on porous material. After cleaning and put in new walls, check periodically to make sure the module does not return.