How to make a perfect finishing plaster is not as easy as it might seem. You can, however, pitfalls in common, following some guidelines to avoid.
They have all the tools at hand. You will need the joint compound and tape in common, a taping knife spreader tool application angle of the tape, and a bread pan. Running around because of the wrong tool can complicate things.
Secure (literally) there are still outstanding. Their measurements must be accurate, and groupssecurely fastened. Use the nails screws (or) that are long enough to keep everything in place: it is permanent. You also have the option of using the glue to hold it in place, only screws (or nails) to the brim.
When the mixture of cement or "mud" as it is more commonly known, try to get a consistency similar to cake flour. Ideally, when a little 'after a spatula to turn, it would stick, but still soft enough to use with ease.
ConsiderUse mesh tape instead of paper tape. Mesh band let "mud" to enter in and gives you a much softer plaster off if you want to achieve with paper tape. It only makes it easier for the first time around.
Remember when the compound for use, not too much to want to sand off later. And 'much harder than it looks. Rather, a broad-bladed tape is used to level out and leave as little sand as possible thereafter.
Untilyou follow these simple rules, you should be able to make a good finish plaster. The first attempt may be perfect, but it does not look terrible. Maintain, but your thoughts on the present task.