Fixing holes in the wall can be built is a challenge where you have no idea how to fix the wall or where it is.
Have you ever seen a closed door because it was a bit 'crazy was something of a person. Well, now you have never seen an open door banged a bit 'too hard, and then heard a sound like something that just stuck to the wall.
Well, now is the sound of your home through the plaster or plaster button. Oh crap now what I do. And try not to blameThis is one of the children. Right About Now you ask what I would do it again and let it happen again.
It has a nice round hole in the door. Three of plaster without removing the item in the wall. After this piece of plaster is put on the side for a possible re-installation. Now get a tape measure to see if the wall is framed with 2 x 4 or 2 x 6
If the wall is built with 2 x 4 will measurethree and a half inch of plaster or plaster. If it is a 2 x 6 wall, measuring five and a half inches of plaster or plaster.
There will be the model 2 x 4 wall to make us lose the hole of the doorknob. Cut a piece of 2 inch x 4-5 long and tapered on both sides of 2 x 4, then you will be able to stick to move the hole.
When you press the tree into the hole sat on the edge and screw pagesplaster. It will take the2 x 4 in place. Once again, the next piece of plaster removed and screw them in plaster. Now for the secret of the completion of the wall.
Go down to your local home improvement store and buy a round rubber door stop on the tire wall. The rubber and plastics will sometimes stop to 6 inches in diameter and is very useful for the holes.
You can also buy another pair of their walls to protect against the great evilopener.
Remain calm under control and continue typing the