It is not easy is not entirely impossible, as some would have us believe that dry your house facades. Dry stone walls you follow a few simple steps. You must use equipment like plaster, patches, paint, hammer, geskuur common, scraper, sandpaper, Tray, try geskuur, more subtle, and many other tools to complete the work. It also depends on the size of the area on the precise nature of the tools and materials needed.
Sandpaper necessary. When you start drywallingprocess, remove any lumps, giving the walls a thorough cleaning and white light is visible. Use a cloth for the cleaning process of the wall, removing any particles of sand to complete.
If the wall has holes, will fill the holes with plaster scraper and geskuur be interrogated using the geskuur common and patch if necessary. When a second layer of plaster is necessary to repeat the course of action until the hole is filled and scraped downfinesse.
He started with the cast until it is necessary to sand down the area, smoothed out the surface and wash the walls, remove dust particles from the wall. Make sure the area is dry before you sandpaper the same. Follow the method of plaster following a systematic approach to show you the kit, which, until reaching a clear and smooth surface.
After an improvement in the wall of dry wall, paint it. Choosing the right brushes and paints suitable for the jobhelping to achieve the best effect is achieved. Before you move the furniture to paint the reference area. Let the paint dry and get through the line again, curtains and upholstery, and other household items.
Dry stone walls are longer, since it is difficult.
Sometimes you can do to repair instead of a big change. Since the walls are layered with a little 'patches and other tools and materials to spruce zone. But if you have bad areas, youthink about other options, otherwise you can hire an expert to get the repairs done.
If you have areas in your house, show wear, which is causing the problem right away can save you many problems later. Normally, a repair is less troublesome to improve whole, so that repairs are almost always a cheaper solution.
Shortly after the plaster is applied, use sandpaper to sand the area. Use your scraper to remove or clear the field if younoting peeling, loose paint or plaster. When the first dry and sanded plaster adds another layer around the hole to cover the whole. Now, the first parts sand and patches. Now you're ready to paint.
It was not so easy?