How to Thaw a frozen water pipes burst

Yes, winter is here or threatening on the horizon, depending on the expected length of stay. Winter brings the family together for holiday celebrations like Christmas, Thanksgiving and Hanukkah. But good and evil tend to travel together.

What nasty little winter events can be expected? Other than that ugly fruit cake Aunt Hannah brought to Thanksgiving dinner every year? They normally blocked water pipes at the right time evil is what seems to think. This article describes howThawing a frozen water pipe.

Be proactive – to prevent a frozen pipe burst water

Benjamin Franklin when he nailed everything sarcastically, "a pinch of prevention is worth a cure."

Best time to have a frozen water pipe was repaired before it happens. This is a great plumbing inspection be carried out before the pool is really still to come. The time from October to November is usually sufficient, but again, depending on latitude. And 'the houseWinter hours.

Do you have water pipes in the attic? In space research? Get in there with a flashlight and make sure everything is well insulated. The tubes have their isolation. pipe insulation foam with a gap of cutting factory is cheap and easy to install.

Silver tape used to seal the crack and the length and elbows. Do not use ordinary tape. It is not just for use in the ceiling.

Other products for highly exposed areas are UL-listed "heat tape" and"Heat cable". The hardware store should stock local products suitable for local use.

Do you have a pool in the garden? If it is warm on a cold season, exhaust, plumbing, and if the weather is very heavy. If you keep warm on cold game, maintaining a pool cover on it when not in use.

When a frozen water pipe burst happen …

frozen water pipes occasionally occur when all precautions are taken. The first attemptrunning water through the tube. He flow at all? If so, lets flow accelerates as it is thawed.

The goal is to get things back to normal until the tube is growing much to burst. There are several components, the speed of thawing frozen water pipes:

Space heating. This is a help to use the following methods to accelerate the dissolution and preservation of the person / people who work more comfortable.
A hairdryer. This is a great gadget, thawedPlumbing. Do not overheat the tube in place, but moving forward, like spray paint.
A heat gun. This is better than a human is at hand. A heat gun is like a hairdryer on steroids. Once again, go ahead.
Filled with water towels. Week towels in hot water and wrap the tubes work well. Works best with two or three men. The objective is to heat the towel. You must use rubber gloves when you choose this method.
An electric heatingpad.An electric heating pad. E 'be the best method because it is dry towel and affecting Real Estate.

Precautions While a burst water pipes thawed

Do not use a blowtorch to thaw the pipes. It may seem obvious, but too much power. Also please do not use any other open flame device. Too dangerous in a confined space.

After Thaw …

When water pipes are thawed and the flow usually watch carefully for a tubecracks that may develop. Leaks, plumbing restored soon. In particular, if the loss is in the attic, there will be a patch work repair for treatment.

Now that the problem areas identified, to develop a better precautions in the future. Install more insulation? More heat on the field? Move the lines? Think creatively and think outside the box.

Copyright 2007-2008 Kelly Smith All rights reserved.This article is reprinted with the author's opinion.

Comments are closed.