The recovery of the walls – How do I chalk

Normal wear can be a blow on the walls to make. If you have children or pets your walls is definitely a need for repair. Add to that the bumps and holes for hanging many pictures and may need an entire wall to solve the problem. There are small things you can do to make wall, or on a large wall is damaged, you need to know how to plaster and start from scratch. Here are some tips to help you.

Not only assume that you have to replace the plaster. There ismany things you can do to make your walls look like new. You can change your walls with fabric or wallpaper, or with some tools and plaster that you can resolve that you need to cover. If your walls are showing minor wear, it is better to solve the problem sooner or later so you do not get to the point where all you need to replace them.

Prior to "clean up" the wall using a paint scraper to remove any remaining paint and chipping. Use natural grain sandpaper to smooth and remove all the excess accumulation ofpaint. Clean the walls with a sponge or a damp cloth to ensure that no dirt or dust or other plaster and paint will stick to it. Fill the holes with plaster and a knife geskuur. Geskuur Use a large knife, if you're a big hole in the tank will still be safe. Wait for the plaster to dry, sand and apply the other layers, until it is flush with the wall. When everything is dry you are ready to paint.

For the most serious damage to the wall, you must start from scratch and I knowhow to install gypsum. It is not difficult, but it takes more patience and time. You can get some more tools including a hammer is needed, cutting knives, T-slot compound, tape and plaster trowel.

Measure the surface is necessary to apply gypsum and enough material for your project for the purchase. Remove all the old plaster and plasterboard new cut to fit the space you need. Using a T-Square, the scores of plaster and stop the excess. From the top and workyour path, so the horizontal seam on the underside of the wall. Affix to plaster with gems special nails or screws. Make sure the seams are as small as possible. When all the plasterboard, tape the seams and apply the mixture with a trowel and spatula. The substance used to cover the bruises of screws or nails.

Wait about 24 hours for the mixture to dry and thus facilitate the wall with a knife and made geskuur sandpaper. Repeatcomposite applications, two or three times more. MUD Drywall finish, use fine grain sandpaper to make the walls smooth as possible. Dry dust and dirt with a damp cloth or sponge. When dry, you're ready to apply the paint.

Comments are closed.