If you have a crane to install cast iron sink base, do it yourself. All you have to do is just below the steps.
First, pedestal sinks to ensure that the wall behind it. For this, make sure the nut into something big
If you have heavy tensioning straps, tile is a clay base usually quite large. On the other hand, if there is only gypsum or plaster behind the sink, theis important to install the retaining wall near the sink. To do this, you must remove the plaster or plaster behind the sink.
Now, nails or screws in the block so that the crane cast iron pedestal sink can hang properly.
Now, repair the hole with waterproof plaster.
Once done, the next step to relieve pelvis and stand in place and the cap of the tank with 2×4s so that theyconstant.
Be very careful while doing it. Ensure that the crane foot cast iron sink is level both front to back and from left to right.
Mark position for the confirmation of the holes on the wall for both basins and pedestal and a hole corresponding points.
Install drain valve and sit on the sink.
Attach the water supply lines to the faucet.
Complete the installation of sewer and water lines and test for leaks.
That's it. Now,enjoy the beauty of the sink.